PFC 12V24V60W LED power supply driver

Details:

12V24V60W,Led Power Supply CE,ROHS,UL,VDE,CUL,CSA,CLASSII,EMC,EMI

Parameter:

MODEL :PFC 2460

AInput Voltage: AC 100-250V (AC 90-264V MAX)

Output Voltage: DC 24V

Output Power: 60W

Output Current: 2.5A

MODEL : PFC1260A

Input Voltage: AC 100-250V (AC 90-264V MAX)

Output Voltage: DC 12V

Output Power: 60W

Output Current: 5A

Ripple & Noise <240mVp-p

Power Factor >0.95

Turn on delay time At 100Vrms 3 Sec

Load regulation ±2%

Frequency range 47~65Hz

Efficiency (Typ.) >88%

Leakage current 0.5mA/240VAC

PROTECTION Over load 4.6~6A

Short circuit yes

Over TEMP. over-temperature protection 80℃

ENVIRONMENT Working TEMP. `-30℃~60℃

Storage TEMP. `-40℃~85℃

Working Humidity IP66

Vibration 10~500Hz,2G 10min/1cycle,TEMP. coefficient ±0.03%/℃(0~50℃)

OTHERSMTBF 50,000 Hrs @ 100% of load,

continues operation,max 5% failures @ Tamb = 40℃

Input Terminals LineBlack

Neutral :White / 2 x AWG18 Length 300 mm

Output Terminals Positive

Red Negative :Blue / 2 x AWG18 Length 300 mm

Dimension 240 x43x30mm

Packing 10pcs/carton ,

900pcs/pannel

Weight 628g

Safety Approval

Product Safety :Class II, SELV output, suitable enclosure is provided

Safety: EN 61347-1 Lamp controlgear.

Part 1: General and safety requirements (IEC D43 61347-1:2000) - EN 61347-2-13

Lamp controlgear - Part 2-13: Particular requirements for d.c. ora.c. supplied electronic convertors for LED modules.

- UL1310 Ed. 5 ¨C Class 2 power supplies

- UL879-Electrical signs (UL48 be replaced by UL879)PerformanceIEC 62384 Ed.1.0

- Performance of controlgear for LED modules D.C. or A.C. supplied electroniccontrolgears for LED modules

- Performance qualifiedEMCGenerated disturbances to the environment.EN 55015, CISPR 55015 Limits and methods of measurement of radio D43 disturbancecharacteristics of electrical lighting and similar equipment

- EN61000-3-2/2000, IEC 61000-3-2Limits for harmonic current emissions (equipment input current <16 A per phase)

- EN61000-3-3/1995+A1/2001, IEC 61000-3-3 Limitation of voltage fluctuations and flickers in low-voltagesupply systems for equipment with rated current <16 A per phase - FCC47 part 18ImmunityEMC immunity requirements

- EN 61547/1995+A12000 (IEC 61000-4-2/2001, IEC 61000-4-3/2002, IEC61000-4-4 Ed2/2004, IEC 61000-4-5/2001, IEC 61000-4-6 Ed2.1/2004, IEC 61000-4-8/2001, IEC61000-4-11 Ed2/2004) -EN 55024/1998+A1/2001+A2/2003 (IEC 61000-4-2/2001, IEC 61000-4-3/2002,IEC 61000-4-4 Ed2/2004, IEC 61000-4-5/2001, IEC 61000-4-6 Ed2.1/2004, IEC 61000-4-8/2001, IEC61000-4-11 Ed2/2004)